Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Connecting Touch screen to conventional logic

Status
Not open for further replies.

tjjustin

Newbie level 1
Joined
Nov 1, 2015
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
7
got a conventional panel with relay based oeration. The relays are operated via normal push buttons as an wehn required. Now i want incorporate a touch screen or touch based buttons without changing the panels or its relay logic. can this be accomplished. If Not what are the changes that should be brought in. How much can it cost.
 

FvM

Super Moderator
Staff member
Joined
Jan 22, 2008
Messages
48,956
Helped
14,344
Reputation
28,952
Reaction score
13,086
Trophy points
1,393
Location
Bochum, Germany
Activity points
282,435
Depends on the touch panel type, may have discrete "buttons" or continuous (x-y) position sensing, newer types are "multi-touch" sensing two or three touches simultaneously.

In any case, a microcontroller or dedicated touch controller should be able to translate the touch input to the intended button actions.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top