sanslonly
Newbie level 2
- Joined
- Aug 8, 2010
- Messages
- 2
- Helped
- 0
- Reputation
- 0
- Reaction score
- 0
- Trophy points
- 1,281
- Location
- Bhubanswar
- Activity points
- 1,297
HI
I am a freshie in embedded. I need to connect the 89c51 programmer with my laptop. Since there are no serial ports, I decided to use the bafo BF-810 USb to Serial port. But the problem is, although the BF-810 has been properly installed in the laptop, but it is not getting connected to the programmer. I use EZ-3 uploader to upload the program. But the EZ uploader is not showing any chip detection. Please help.
I am a freshie in embedded. I need to connect the 89c51 programmer with my laptop. Since there are no serial ports, I decided to use the bafo BF-810 USb to Serial port. But the problem is, although the BF-810 has been properly installed in the laptop, but it is not getting connected to the programmer. I use EZ-3 uploader to upload the program. But the EZ uploader is not showing any chip detection. Please help.