Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Connect Sim900 to Port 1850 via TCP-IP

Status
Not open for further replies.
nimaaa

nimaaa

Newbie level 6
Joined
Jul 25, 2014
Messages
14
Helped
1
Reputation
2
Reaction score
1
Trophy points
3
Location
Tehran, Iran, Iran
Activity points
122
Hi All

I want to connect sim900 module to my webserver , but after using " AT + CIPSTART " AT command , I get this response from sim900 :

STATE : TCP CLOSED
CONNECTION FAIL

what I should do to solve this problem ??

I should mention that I have no problem in connecting to port 80 which belongs to GOOGLE

my port number is 8500


thank you
 

nimaaa said:
Hi All

I want to connect sim900 module to my webserver , but after using " AT + CIPSTART " AT command , I get this response from sim900 :

STATE : TCP CLOSED
CONNECTION FAIL

what I should do to solve this problem ??

I should mention that I have no problem in connecting to port 80 which belongs to GOOGLE

my port number is 8500


thank you
Click to expand...

Hi,

Maybe this thread will help you. Good luck. https://www.edaboard.com/threads/305187/
 
  • Like
Reactions: nimaaa

    nimaaa

    nimaaa

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top