Connect PC & PIC using Bluetooth

[nicko-391]

I want to connect PIC(18f or 16f) with PC using Bluetooth.I never used Bluetooth module.How can I start this? Which Bluetooth module is suitable for this?



Please Help.

 

[DevilMKD]

you can use some serial bluetooth module for connecting to the PIC, and some USB device for the PC
u need only a program that will work on the PC and recognize the PIC ..

 

[horace1]

I have used a Bluegiga WT12 module with a PIC24FJ64GB002 for a similar project
**broken link removed**

The PIC24FJ64GB002 comes in a 28 SDIP package so makes it easy to build a simple of PCB or even a breadboard

Microchip USB stack available fee from
**broken link removed**

 

[ckshivaram]

you can use a bluetooth module which comes as serial interface module and the pc side you can use a dongle.

visit N S K E L E C T R O N I C S
Sunrom Technologies, Your Source for Development

then you can use bluesoleil software to make connection and then using hyperterminal capture the data and display it on hyperterminal....

 

[miredox]

**broken link removed** also seems to be a nice solution. You just communicate with your PC through the UART interface of your PIC, which is very easy. It has a standard pitched connector so you can just plug the module onto a breadboard or solderboard.