Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Connect 2 x 2.1 using splitter jack

Status
Not open for further replies.

Lexianus

Newbie level 1
Joined
Apr 19, 2011
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,289
Hi, I'm new around here.

Hopefully, I will get some answers from you guys, because I've surfed the internet alot without success.

I have two 2.1 audio systems called CJC 61D, and I want to connect them both to the same output of my laptop's sound card (Conexant HD).

I bought an audio jack splitter, but when i connect the 2 systems, the following thing happens; both subwoofers are working, but only one satelitte (speaker) from each system works.

The sattelites are being connected to the subwoofer using RCA jacks, and the connection from the subwoofer to the sound card is made using a 2xRCA to 3.5mm jack cable

Do you have any idea what i can do to make both of the speakers from each system to work properly? Thanks!
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top