Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

component selection( loads)

Status
Not open for further replies.
P

psr

Junior Member level 1
Joined
May 8, 2008
Messages
18
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,397
Hello Guys,

I am new to Hardware testing. I need to select few loads with respect to the driver output rating. Can anyone Please help me in selecting the loads.

Driver rating
Imax- 1A
overload- <5A
Miimum rise and fall time 10 us.

Load types can be

- Capacitive, max 10µF, (e.g. LED matrix)
- Inductive loads with EAS up to 65mJ.

I am searching for LED matrix but unable to find. Please help.

Thanks in advance.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top