Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Comparing 2 voltages, frequencies/phases

Status
Not open for further replies.

pablome

Newbie level 6
Joined
Jun 25, 2007
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,350
Im taking two Inputs. One Reference and one Input to compare. Vref is around 120 AC 60 HZ Single Phase from 3 phase source bench/lab supply.
Other is from 3phase synchronous motor(only gonna use one phase from it to compare). At 1800RPM supplies 60Hz and hopefully around 120V.

I want to compare the voltages, frequency/phase with some circuit and feed it to the microcontroller(motorlla 68hc11e9)
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top