Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Compaq Evo N600c Motherboard

Status
Not open for further replies.
S

swyete

Newbie level 1
Joined
Jan 16, 2010
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Radcliff, KY
Activity points
1,288
I have a Compaq Evo N600c that had liquid spilled on the keyboard and fried the motherboard. I ordered a one and after replacing it the new board would not power up.

With the old board installed or removed the fan will power up and the boot lights will flash. Nothing will power up on the new board. I thought I had a faulty motherboard so I ordered another one but it does the exact same thing, NOTHING.

All three boards are the exact board with matching #s on all three.

Is there something I am missing?

Thanks for any assistance anyone may be able to provide.

John
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top