Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Colpitts oscillator using operational amp

Status
Not open for further replies.

scorpionss22

Full Member level 2
Joined
Jan 8, 2004
Messages
146
Helped
4
Reputation
8
Reaction score
1
Trophy points
1,298
Activity points
1,284
colpitts op amp oscillator

hi all
ineed Colpitts oscillator using operational amp
and how can i find its gain and feedback gain
thanks for cooperation
 

colpitt oscillator using op amp

for finding gain , just find voltage gain of the op amp first, which is say A. then find the K which is the feedback ratio from the feedback network. Gain is given by G= A/(1+KA).... the circuit is similar to colpitt with BJT.. just put the feedbacknetwork innegative feedback with the op-amp.
 

colpitts oscillator amp op

After some search I finally found the direct link to the article:
**broken link removed**
 

colpitts oscillator, op amp

i need to analyise this circuit below
i need the equetion of the gain from feed back and for the amplifire
included the internal resistor of the operational amplifire(out put resistor )
 

colpitts oscillator op amp

hello any one help me to solve this circuit
 

If i've done everything rigth:

A=(s^3*R*L*C2+s*R)*C1+(s^2*L+s*R)*C2+1

and the gain of the feedback should be

1/((s^3*R*L*C2+s*R)*C1+(s^2*L+s*R)*C2+1)

but don't trust this too much until someone else checks this result
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top