Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Code for implementing UART for XUP Virtex II board and PC link

Status
Not open for further replies.
S

suddy72

Member level 2
Joined
Jun 28, 2007
Messages
50
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Activity points
1,694
Hi people,
I am trying to set up a serial link so i can send data for an XUP Virtex II board to the PC. Before sending this data i belive you have to implement a UART, is this correct ? Does anyone have any code for this or an example of one in use ?

Cheers,

Stuart
 

UART code.

look at the Xilinx web site there are some app notes fro te UART/SPI/I2C communication

good lack
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top