Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Choosing specification and designing flash type ADC

Status
Not open for further replies.

VINAY_RAO

Junior Member level 2
Joined
Jul 24, 2009
Messages
22
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
IITG
Activity points
1,510
hi,,
I am doing my post graduation and planning to do my project on flash type ADC.Can any one suggest me,how i can go for choosing specification and designing ADC, and can i get any thesis through the net???.....
 

DZC

Full Member level 3
Joined
Sep 12, 2006
Messages
150
Helped
13
Reputation
26
Reaction score
4
Trophy points
1,298
Activity points
2,122
flash adc design

flash seems not a hot topic now
except that you've got some brilliant idea already.
Good luck !
 

VINAY_RAO

Junior Member level 2
Joined
Jul 24, 2009
Messages
22
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
IITG
Activity points
1,510
flash adcs

which would be good 2 opt for??
 

nadigsharma

Newbie level 4
Joined
May 4, 2009
Messages
7
Helped
2
Reputation
4
Reaction score
2
Trophy points
1,283
Activity points
1,310
flash type adc

u can do Flash ADC but i need to know how many bit of ADC u need to do
 

VINAY_RAO

Junior Member level 2
Joined
Jul 24, 2009
Messages
22
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
IITG
Activity points
1,510
cmos flash type adc

I am instructed to go for 6 bit and 1Gsmpls/sec...is it obsolete one??
 

JoannesPaulus

Advanced Member level 3
Joined
Mar 19, 2008
Messages
773
Helped
235
Reputation
470
Reaction score
137
Trophy points
1,323
Location
USA
Activity points
5,006
cmos flash type adc projects

VERY OBSOLETE!
The major goal in flash ADCs nowadays is low power, high resolution. A 6-bit flash at 1GS/s, in BiCMOS technology, was already available in 1994... It used about 8W at 5V.
Today, you can find CMOS flash ADCs that use less than 1W for the same specs.
 

VINAY_RAO

Junior Member level 2
Joined
Jul 24, 2009
Messages
22
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
IITG
Activity points
1,510
flash adc spec

If i hv 2 go only for flash then which resolution adc i can go for..Generally how much time it may take??.. If FLASH adc is nt the priority one then which type of ADC or on which topic (todays hot topic) i cn opt for??..
Thank you..
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top