Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Choice of the sigma-delta architecture

Status
Not open for further replies.

lines

Newbie level 6
Joined
Jul 12, 2011
Messages
12
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,283
Activity points
1,379
Hi,all:
In sigma-delta designs,the architecture of the circuit is important,and there is lots of architectures to chose.
but,How I choice the best one? Try one by one?
And,when I choice the architecture, how I get the coefficient?
For example,in the picture below,How I get the coefficient by a quick method? 2011-07-12_165009.jpg

Thank you!


Use normal font size like everyone else, don't use capitals or big fonts. [alexan_e]
 

To choose the architecture, it's all about trade-off. There is no "best" architecture.
OSR - filter order - number of bit for the quantizer - continous time vs switched-cap... Each architecture has advantanges and drawbacks. It depends what you expect from you design : high accuracy ? high-speed ? low-power ?
 

To choose the architecture, it's all about trade-off. There is no "best" architecture.
OSR - filter order - number of bit for the quantizer - continous time vs switched-cap... Each architecture has advantanges and drawbacks. It depends what you expect from you design : high accuracy ? high-speed ? low-power ?
Thank you for you reply,setlaz!
you mention the quantizer,I don't know what the nlev(the level of quantize) mean,can you explain it to me?
and how I get the coefficient quickly? I know the sigma-delta toolbox,but its only have some fixed architecture.
can you recommond some books to me? I have delta-sigma data converters only.
 

For the books, the most useful I found are :

Σ∆ A/D CONVERSION FOR SIGNAL CONDITIONING (Kathleen Philips & Arthur H. M. van Roermund)
Principles of Data Conversion System Design (Behzad Razavi)
Delta-Sigma Data Converters - Theory, Design and Simulation (Steven R. Norsworthy - Richard Schreier - Gabor C. Temes)

You will find all the informations you need in there and even more. (you can find them easily on Google)

For the coefficients, I don't know, but for 2nd and more filter order, you also have different topologies with feedback structures, feedforward structures and feedback+feedforward structures...

Good luck !
 

For the books, the most useful I found are :

Σ∆ A/D CONVERSION FOR SIGNAL CONDITIONING (Kathleen Philips & Arthur H. M. van Roermund)
Principles of Data Conversion System Design (Behzad Razavi)
Delta-Sigma Data Converters - Theory, Design and Simulation (Steven R. Norsworthy - Richard Schreier - Gabor C. Temes)

You will find all the informations you need in there and even more. (you can find them easily on Google)

For the coefficients, I don't know, but for 2nd and more filter order, you also have different topologies with feedback structures, feedforward structures and feedback+feedforward structures...

Good luck !
Thank you very much.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top