Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Chipcon CC1010 TX-RX + uC

Status
Not open for further replies.

Humungus

Full Member level 6
Joined
Jul 10, 2001
Messages
383
Helped
41
Reputation
82
Reaction score
15
Trophy points
1,298
Activity points
3,985
does somebody have experience at programming Chipcon product CC1010?

It is a transceiver+8051 uC

I just bought the develoment kit (waiting for it; it'll arrive next week)
I'd like to know what's the maximum sample rate I could use one of the ADCs at 8bits precision and send that data to a PC.

Could I get a data rate of 64kbps?

Thanks for your help

Humungus
 

You can get up to 250ksps from the ADC, for the evalution board you have to set the ADCON2 register to freq. divider of 64, then you will get round about 230ksps.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top