Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Charging time for AA Batteries

Status
Not open for further replies.

tutul1717

Newbie level 3
Newbie level 3
Joined
Jun 23, 2014
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
37
Hi,
(A) I have used 6 AA (total 7.2 V) batteries in a kid’s toy (Contest F1 Racing Car; 1/10th Scale, No.: 6643 ). Pls find battery details below:
1. Sony rechargeable batteries / Cycle Energy Multi-Use Premium Rechargeable Battery (Ni-MH AA, Pre-charged 2500 mAh; Model no.: NH-AA-B2GN).
2. All 6 batteries are connected by Kyosho / Tamiya Connectors.
I would like to know:-
1. How long I will have to charge all these 6 batteries with:
(a) The charger / adapter provided with that toy (Model: YX-3515A8, Input: AC 220V 50/60 Hz, Output: DC 7.2V 250 mA). Batteries (6) provided with this charger (L J BATTERY RA07d AA 500mAh 7.2V; these 6 cells are not so good quality).
(b) The charger / adapter I made with the help of a technician for the better performance / result (Model: DJ-E060500, Input: AC 230V 50/60 Hz, Output: DC 6V 500 mA).
(B) I have used 4 AA (total 4.8 V) batteries in a kid’s toy (Jeep, Military Corps Special, Cross Country, 1:16 Scale, No.: 360A). Pls find battery details below:
1. Sony rechargeable batteries / Cycle Energy Multi-Use Premium Rechargeable Battery (Ni-MH AA, Pre-charged 2100 mAh; Model no.: NH-AA-B2KN).
2. All 4 batteries are connected by 2 pin JST Connectors or Male Connector w / Wire for 1 / 18 Battery C22630 (may be / I am confused); pls find attachment for the pic of that 2 pin Connector in Adapter side or pls check this link https://www.integy.com/st_prod.html?p_prodid=6566#.U6Ya2bEmETg .
I would like to know:-
1. How long I had to / will have to charge all these 4 batteries with:
(a) The charger / adapter provided with that toy (Model: XD-048250, Input: AC 220-240V 50/60 Hz, Output: DC 4.8V 250 mA). Batteries (4) provided with this charger (Model unknown; these 4 cells are not so good quality and already out of order).
(b) The charger / adapter I made with the help of a technician for the better performance / result (Model: PH-0450500 UP, Input: AC 220V 50 Hz, Output: DC 4.5V 500 mA).
(C) What is the charging time for rechargeable AA batteries (separate 02 / 03 pcs) when it is used several times earlier not the first time.

(D) Does pre-charged Sony Ni-MH AA batteries need to charge before use !

Thanks
 

1. The normal charging time for Ni-MH batteries is around 10 to 12 hours. Fast charging time is around 6 hours.
2. Ideal time required for charging (Hours) = (capacity in mAh)/(charging current in mA)
3. However due to several factors the time obtained above must be multiplied by a factor of approximately 1.1 to 1.2
4. With 250mA charger 2500mAh battery will require (2500/250)*1.1 = 11 hours.
5. With 500mA charger time would be 5.5 hours
 

1 Battery capacity is 2000 mAh and for 6 batteries (6X2000 mAh ) 12000 mAh

I would like to know these charging time is for a single battery or for all 6 batteries connected in a series circuit !

I mean:
If a charger has 500 mA then the charging time for 6 batteries (total 7.2V): 2000 / 500 = 4 Hrs or 12000 / 500 = 40 hrs ??

What about a charger of 7.5V and 1000 mA for charging these 6 batteries! Will it be: 2000 / 1000 = 2 Hrs or 12000 / 1000 = 12 Hrs !!

Pls explain.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top