Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

[General] CF card not booting

Status
Not open for further replies.

Pujdan

Newbie
Newbie level 1
Joined
Feb 3, 2021
Messages
1
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
11
Hello gents.
I am new at forum and I need help.
I have issue with one omron HMI.
During loading new program in it, it failed whit one error. To solve this error, firmware needs to be recovered. To recover firmware I using CF card 128Mb. When I insert this card in the HMI with folders of firmware it seams that HMI dont recognize this CF card. As I it mention as per omron procedure for recovery we need to use only omron CF card. It seams that this card have special format (fat 16). I have software for formating and I find that on this CF card MBR is set like this (picture attached). Does any one have expiriance with this to help me out?
Thanks
 

Attachments

  • Screenshot_20210202-230936.png
    Screenshot_20210202-230936.png
    2.2 MB · Views: 41

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top