Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Cellular VPN Access Using SIM900

Status
Not open for further replies.
B

bonchenko

Newbie level 3
Newbie level 3
Joined
May 15, 2010
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Location
Bandung
Visit site
Activity points
1,310
Hello, anybody ever deal with VPN networking using SIM900 or other GPRS/3G module? I am confused as to what AT command to use in order to select the VPN and enter username and password. I looked up in SIM900 AT command manual, but nothing specify VPN. Closest I can find regarding username and password would be setting APN.

Any insights are welcome. Thanks mate!
 

I think that you will need a separate processor running software that implements the VPN protocol that you need.
 

I think you are confusing VPN network and parameters used to access the VPN network...In order to access the VPN network, three parameters are mandatory: APN, USERNAME & PASSWORD..

There is nothing called VPN parameter to be selected in the SIM900 module..
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top