Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Cell Library Needed for Leonardo Spectrum

Status
Not open for further replies.

hrithik

Newbie level 3
Joined
Nov 15, 2010
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,308
I need a basic cell library for leonardo spectrum.
The library should have only 2, 3, 4 input gates (AND2,AND3,AND4, NAND2, NAND3, NAND4, OR2, OR3, OR4, NOR2, NOR3, NOR4, XOR2, XOR3, XOR4, XNOR2, XNOR3, XNOR4, Full Adder, Half Adder, Inverter, MUX2, MUX4)

I have to synthesize simple combinatorial designs like Mult4x4, ALU to this library.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top