Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

CDMA RECEIVERS -MATLAB CODES

Status
Not open for further replies.

Maya Laxman Sawant

Newbie level 5
Joined
Feb 24, 2006
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,372
SOME ONE PLEASE REPLY URGENTLY.........



Hello,

I am trying to do a project on “MULTIUSER DETECTION FOR DS-CDMA UWB SYSTEM” in which I am going to compare performance of “matched filter”, “RAKE receiver” and “MMSE receiver”, which are the CDMA receivers.

Our goal is to examine the performance for the following scenarios:
a) Multipath channel, no interferers
b) Multipath channel, one narrowband interferer
c) Multipath channel, multiple DS-CDMA UWB signals
d) Multipath channel, one narrowband interferer and multiple DS-CDMA UWB signals.

For this I am planning to use Kasami codes for generation of spreading sequence with the length 15 and the chip rate of 1.5 GHz in the band width of 2-8 GHz.

Kindly help me in writing the MATLAB simulation programs for the stated above.

Regards,
Maya.
 

I can't see any link except
broken link removed
plz tell me the website's name.
Thanx
 
Last edited by a moderator:

Maya Laxman Sawant said:
SOME ONE PLEASE REPLY URGENTLY.........



Hello,

I am trying to do a project on “MULTIUSER DETECTION FOR DS-CDMA UWB SYSTEM” in which I am going to compare performance of “matched filter”, “RAKE receiver” and “MMSE receiver”, which are the CDMA receivers.

Our goal is to examine the performance for the following scenarios:
a) Multipath channel, no interferers
b) Multipath channel, one narrowband interferer
c) Multipath channel, multiple DS-CDMA UWB signals
d) Multipath channel, one narrowband interferer and multiple DS-CDMA UWB signals.

For this I am planning to use Kasami codes for generation of spreading sequence with the length 15 and the chip rate of 1.5 GHz in the band width of 2-8 GHz.

Kindly help me in writing the MATLAB simulation programs for the stated above.

Regards,
Maya.


why dont try in mathworks.com u may find some...
 

Maya Laxman Sawant said:
SOME ONE PLEASE REPLY URGENTLY.........



Hello,

I am trying to do a project on �MULTIUSER DETECTION FOR DS-CDMA UWB SYSTEM� in which I am going to compare performance of �matched filter�, �RAKE receiver� and �MMSE receiver�, which are the CDMA receivers.

Our goal is to examine the performance for the following scenarios:
a) Multipath channel, no interferers
b) Multipath channel, one narrowband interferer
c) Multipath channel, multiple DS-CDMA UWB signals
d) Multipath channel, one narrowband interferer and multiple DS-CDMA UWB signals.

For this I am planning to use Kasami codes for generation of spreading sequence with the length 15 and the chip rate of 1.5 GHz in the band width of 2-8 GHz.

Kindly help me in writing the MATLAB simulation programs for the stated above.

Regards,
Maya.
 
Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top