lucasdark
Newbie level 1
I am using Pic 16 Family (14 bits), CCS C compiler and Proteus for the simulation.
I am using in Proteus the program file .COF generated by CCS PCM C Compiler.
Always that the compiled program is less than 2K (<0x07FF) I can get correct simulation in both Stepping a Execute modes from Proteus.
But when the Program exceed 2K (>0x07FF) I can’t simulate in Stepping mode (Using F11)
Somebody can help me to find the problem?
I would appreciate your help.
Thank you.
I make a test using the example file included in the CCS C Compiler “EX_VOICE.C”.
I compiled it using Microchip 14 bits, I got EX_VOICE.cof file and I ran it using Proteus, but it didn’t work in Stepping mode.
:?:
I am using in Proteus the program file .COF generated by CCS PCM C Compiler.
Always that the compiled program is less than 2K (<0x07FF) I can get correct simulation in both Stepping a Execute modes from Proteus.
But when the Program exceed 2K (>0x07FF) I can’t simulate in Stepping mode (Using F11)
Somebody can help me to find the problem?
I would appreciate your help.
Thank you.
I make a test using the example file included in the CCS C Compiler “EX_VOICE.C”.
I compiled it using Microchip 14 bits, I got EX_VOICE.cof file and I ran it using Proteus, but it didn’t work in Stepping mode.
:?: