Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Car Alarm Systems Manipulation

Status
Not open for further replies.

elockpicker

Member level 4
Joined
Jul 25, 2008
Messages
74
Helped
2
Reputation
4
Reaction score
1
Trophy points
1,288
Activity points
1,813
ultrasonic car alarm frequency

hi
as you know many car alarm systems use ultrasonic sensors.
when you lock the doors ,the act as radars.
I thought we might be able to trigger the car alarm without even touching the car:
If we send some ultrasonic pulses from outside the car ,the equilibrium might be disturbed so the alarm turns on.
since the sensor scans a particular frequency we have to sweep a range of frequncies like 20KHz ~ 100KHz.
This can be done using the output of an AVR timer.
do you agree ?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top