Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Capture and compare module - Application

Status
Not open for further replies.

Maverickmax

Advanced Member level 1
Joined
Dec 6, 2004
Messages
404
Helped
8
Reputation
16
Reaction score
3
Trophy points
1,298
Activity points
3,691
Hi

I have tried to google in attempt to determine the Capture and compare module's application. As I need to know what are they used for...

I would appreicate if you give any link or example of using this module

Cheer

MM
 

BabyTiger

Full Member level 2
Joined
Aug 8, 2005
Messages
123
Helped
4
Reputation
8
Reaction score
2
Trophy points
1,298
Activity points
2,126
It use for measuring time period.
 

ravimarcus

Full Member level 4
Joined
May 9, 2005
Messages
218
Helped
31
Reputation
62
Reaction score
12
Trophy points
1,298
Location
Bangalore, INDIA
Activity points
2,797
Capture is used to capture the time using TMR1 between two edges. This time can then be converted to frequency.

In Compare mode the TMR1 will be free running, as soon as the TMR1 is equal to the value in compare register, a special event can be triggered. The special event can be a change of output or start ADC conversion. It can also be used for waveform generation.

Cheers

Ravi
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top