Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

capacitor for maintaning peak current

Status
Not open for further replies.
bilgekaan

bilgekaan

Full Member level 2
Joined
Nov 18, 2004
Messages
125
Helped
15
Reputation
30
Reaction score
1
Trophy points
1,298
Location
Turkiye
Activity points
1,300
Hello,
I am using 3.6 V lithium battery for gsm application.But battery cannot maintain peak currents during transmit and modul goes to reset.
I am thinking of putting large capacitors in parallel to battery maintain peaks.

Is it Ok? or not .Disadvantage ? I am waiting for suggestion.
regards
Bilge
 

You'll find sufficient bypass capacitors required in most GSM module datasheets and application notes.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top