Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Capacitor and guard bar

Status
Not open for further replies.

pat_fr

Newbie level 6
Joined
Dec 4, 2005
Messages
11
Helped
1
Reputation
2
Reaction score
0
Trophy points
1,281
Activity points
1,357
Hi all,

Does a capacitor need a guard bar or not ? and why ?

Thanks
 

At a glance it need a guard band if it's a large area.

There are several ways to build capacitor according to the material used.

Usually parasitic capacitance will be build within the transistor it self, but the value is small...

we need a guard bar coz we are affraid that it will cause signal delay and also higher power density.
 

    pat_fr

    Points: 2
    Helpful Answer Positive Rating
Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top