Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Can't I make parametic sweep at PSPICE?

Status
Not open for further replies.

GMSong

Newbie level 5
Joined
Apr 16, 2021
Messages
10
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
102
1623366620031.png


1623366627899.png



I want to sweep gate's offset voltage of the CS Amplifier.
I set VOFF as {VOFF} and added device PARAMETERS and made parametic sweep.
And you can see it works well (VOFF=1 to 10)
BUt the result is 0V/V at output what happens here?

Can't I make VOFF to variable?

P.S when I make Resistance or capacitance to variable, it works.
 

VOFF is a parameter of the time domain sine source, but you are performing an AC analysis. DC voltage is the parameter you want to sweep.
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top