T
treez
Guest
Hello,
Hello, we need a wire to board connector, 2 way. Size less than 13mm x 8mm (length x width), and height less than 10mm
We need the connector (>0.5A) and rated to 400V at least. Though in nominal use it will have 75V between terminals.
This is the connector (Wago) we currently use and its too big......
Wago 2060-402/998-404 connector:
https://www.farnell.com/datasheets/...MIuJKv2sXw1wIVRrcbCh19bQMeEAAYASAAEgKaW_D_BwE
We simply cannot find anything, we have searched Wago, Pheonix, Molex, JST, etc, but nothing.
Any ideas appreciated?
Hello, we need a wire to board connector, 2 way. Size less than 13mm x 8mm (length x width), and height less than 10mm
We need the connector (>0.5A) and rated to 400V at least. Though in nominal use it will have 75V between terminals.
This is the connector (Wago) we currently use and its too big......
Wago 2060-402/998-404 connector:
https://www.farnell.com/datasheets/...MIuJKv2sXw1wIVRrcbCh19bQMeEAAYASAAEgKaW_D_BwE
We simply cannot find anything, we have searched Wago, Pheonix, Molex, JST, etc, but nothing.
Any ideas appreciated?