Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Can't figure out how microsd card goes into socket

Status
Not open for further replies.
B

Build-A-Burger

Full Member level 1
Joined
Oct 27, 2010
Messages
95
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,286
Location
Wyoming
Activity points
2,101
I bought an embedded linux card (Technologic Systems TS-4600) and it came without the OS. So I burned an image on a microsd card and could not figure out how its supposed to be inserted in the slot. Do I have the wrong sd card? The manual wasn't much help: TS-4600

IMG_20220430_083109.jpg

microsd.jpg

--- Updated ---

ok, I figured it out: you have to slide the card into the metal flap and then press it into place and lock it.
 
Last edited:

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top