Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Cannot update CFD properties in NCSU CDK on IC 5.0.33

Status
Not open for further replies.
G

gold_kiss

Full Member level 4
Joined
Sep 11, 2002
Messages
211
Helped
7
Reputation
14
Reaction score
4
Trophy points
1,298
Activity points
1,789
NCSU CDK problem

Hi,
I installed NCSU CDK on IC 5.0.33 on linux 7.3.

To see whether the installation is done properly ...the best way is to design some small circuit and see its characteristics.

So in view of this I drew an Inverter using 0.6u AMI tech file.

Wht happens is i cud draw the schematic but cud not update any CFD properties of MOS. As the CFD window does not apper only.

I mean i just cant put multiplier / width/ lenght ...etc fields...
Any suggestions pls?
Thanks,
Gold_kiss
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top