Mar 18, 2010 #1 R rez Newbie level 6 Joined Mar 26, 2009 Messages 13 Helped 0 Reputation 0 Reaction score 0 Trophy points 1,281 Activity points 1,365 can we use multimeter to detect the analog signal from EZ1 at the signal pin???
Mar 19, 2010 #2 K kender Advanced Member level 4 Joined Jun 19, 2005 Messages 1,425 Helped 138 Reputation 276 Reaction score 39 Trophy points 1,328 Location Stanford, SF Bay Peninsula, California, Earth, Sol Activity points 10,035 Re: EZ1 sensor If you are talking about EZ1 ultrasonic sensor, then yes, you probably can read the analog output with voltmeter. The overview (https://www.roboticsconnection.com/p-58-maxbotix-maxsonar-ez1.aspx) says: The analog voltage output provides 10mV per inch output and always holds the latest range reading. Click to expand...
Re: EZ1 sensor If you are talking about EZ1 ultrasonic sensor, then yes, you probably can read the analog output with voltmeter. The overview (https://www.roboticsconnection.com/p-58-maxbotix-maxsonar-ez1.aspx) says: The analog voltage output provides 10mV per inch output and always holds the latest range reading. Click to expand...