Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronic Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Can Specific Absorption Rate (SAR) be measured?

Status
Not open for further replies.

kae_jolie

Full Member level 4
Joined
Oct 13, 2006
Messages
234
Helped
9
Reputation
18
Reaction score
8
Trophy points
1,298
Activity points
3,158
I know it is simulated in HFSS, FEKO, etc....however, can one meaure SAR in a real live setting? If so, how?

Also, how does HFSS and FEKO calculate/sumulate SAR? Do they use the same equation/technique?

Thanks.
 

e_m_c

Full Member level 3
Joined
May 7, 2008
Messages
169
Helped
38
Reputation
74
Reaction score
19
Trophy points
1,298
Location
Land
Activity points
2,176
Check this:

SAR Measurements:
http://www.semcad.com/measurement/isar/index.php
http://www.semcad.com/downloads/flyers/speag_isar.pdf

SAR Simulation:
http://www.semcad.com/simulation/products/solutions/med.php

There are also several publications linked from the site:

http://www.semcad.com/simulation/publications/

Look for SAR in titles:
http://www3.interscience.wiley.com/cgi-bin/fulltext/112636400/PDFSTART - here in beginning they discuss difference between several method sued for SAR calculation.

There are linked many papers, which might be interesting for you.
 

Status
Not open for further replies.
Toggle Sidebar

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top