Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Can Java be used for communication with micro via PC?

Status
Not open for further replies.
S

semiconductor

Full Member level 4
Joined
Apr 4, 2003
Messages
236
Helped
4
Reputation
8
Reaction score
0
Trophy points
1,296
Activity points
2,735
Java and uC via PC

Can I use Java language to communicate with a microcontroller (such as PIC 16F877A) via COM port?

Can you recommend me some websites to get knowledge in this field?
 

Re: Java and uC via PC

Actually, I think you can find the information you needed in
h77p://forum.java.sun.com
by searching java, serial, comm such keywords.
 

Java and uC via PC

Hi,

Never tryed it, but im sure you can. If you are using RS-232 or any other type of comunication, you will need in the PIC to receive the code and then desifer it. It doesnt matter if you are sending JAVA code or C or C++ or any other type of commands. All of them will have to be decipher by the PIC.
Good luck.
 

Java and uC via PC

Just create a code that will access the port of the PC.
 

Re: Java and uC via PC

i did using pic16f84a and c for accessing serial port
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top