Can I program at89c51rd2 with SPI programmers for 89s51?

[naseerak]

at89c51rd2 spi

My friends i am in confusion I want to programm at89c51rd2 is it possible to do so with spi programmers for 89s51 etc

 

[wzdreamer]

at89c51rd2+serial programmer

http://www.atmel.com/dyn/resources/prod_documents/doc4235.pdf

in doc4235.pdf on the first page see third feature.
- ISP (In-System Programming) Using Standard Vcc Power Supply

Maybe, if your programmer has support for this device ))
Flash programming - 3 ways.
1. ISP with bootloader
2. Boot-Rom low level routines
3. standard parallel programming

see on page 96 in this document...

 

[naseerak]

Re: at89c51rd2

Hi
You are right but I need fully built programmer And dont want to hang around for new devlopment of programmer

 

[rtos]

Re: at89c51rd2

To program AT89c51rd2 you need:

1. Flip software (freely downloadable from ATMEL web page)
2. Standard RS232 conx between your AT89c51rd2 circuit & PC serial port

more info from
http://www.atmel.com/dyn/resources/prod_documents/doc4062.pdf

 

[naseerak]

Re: at89c51rd2

PEACE TO ALL
I AM STILL IN SEARCH OF SPI CABEL FOR AT89C51RD2 BUT TO NO VAIL CAN SOMEBODY GIVE ME MEANIGFUL INFORMATION OR READY MADE SCHEMATIC

 

[hartsa]

Re: at89c51rd2

cable schematic for flip & 89c51rd2