Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Can Change VFD with an LCD

Status
Not open for further replies.

maxim10373

Advanced Member level 4
Full Member level 1
Joined
Feb 26, 2010
Messages
116
Helped
1
Reputation
2
Reaction score
2
Trophy points
1,298
Visit site
Activity points
2,066
Need to buy a VFD CU40026MCPB-S44A
can use any substitute or where available
INDIA


Thanks
Maxim
 

Need to buy a VFD CU40026MCPB-S44A
can use any substitute or where available
INDIA


Thanks
Maxim

Dear,
It is not clear, what do you exactly need. Please elaborate. Do you wish to change, or control the parameters of VFD with LCD type HMI? Do you wish an Indian replacement of VFD? Please clarify in details.
M.
 

Dear sir,
My VFD CU40026 MCPB-S37A is defective.
This is not available in India,there fore
I need to change this vfd to LCD with
the same controller.Here used 8255,UM62256and80C31
micro controller circuit.

Thanks
Maxim
 

Dear sir,
My VFD CU40026 MCPB-S37A is defective.
This is not available in India,there fore
I need to change this vfd to LCD with
the same controller.Here used 8255,UM62256and80C31
micro controller circuit.

Thanks
Maxim

Hello,
Below are a few links, which are near to what you are looking for. Please study and see of these can help. It looks that the control system with which it is used, is properietoty and pretty old technology. If the machine / process controlled by it is simple, you can consider a replacement with current professional PLC/ HMI type of system.
http://www.newark.com/noritake-itron/cu40026-tw200a/display-vfd-blue-green-16-x-188/dp/01M7278
http://in.element14.com/noritake-itron/cu40025-uw6j/vfd-module-2x40-5mm-blue-green/dp/1495418
**broken link removed**
http://www.americanmicrosemi.com/information/spec/?ss_pn=CU40026MCPB-S31A

M.
 

Hello,
Below are a few links, which are near to what you are looking for. Please study and see of these can help. It looks that the control system with which it is used, is properietoty and pretty old technology. If the machine / process controlled by it is simple, you can consider a replacement with current professional PLC/ HMI type of system.
http://www.newark.com/noritake-itron/cu40026-tw200a/display-vfd-blue-green-16-x-188/dp/01M7278
http://in.element14.com/noritake-itron/cu40025-uw6j/vfd-module-2x40-5mm-blue-green/dp/1495418
**broken link removed**
http://www.americanmicrosemi.com/information/spec/?ss_pn=CU40026MCPB-S31A

M.


It is helpful
Thanks & Regards
Maxim
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top