Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

can any one tell regarding sta interview questions

Status
Not open for further replies.

mallikmarasu

Member level 3
Joined
Dec 21, 2006
Messages
58
Helped
3
Reputation
6
Reaction score
1
Trophy points
1,288
Activity points
1,703
sta interview questions

can any one tell regarding sta interview questions
 

sta related interview question

should be basic conceptions
 

sta interview

beta0 said:
should be basic conceptions
seems fundamentals of STA
difference of dynamic timing analysis and static timing analysis
setup/hold
removal/recovery
timing ECO methodology
timing closure etc.
 

about STA,

in what process corners u will check for setup and hold violations.

There may questions, how setup check and hold check for the same paths.
 

Hi,
what is sta and dta,
diff b/w them,
what type of analysys is done in STA,
off path, on path delay timing analisys.
or false path removal,
path based analisys model,
logic based analisys,
timing closures,
critical path delay analysys,
max path delay estimation,
clock uncertainity.....
 

ON path means for a particular path from input port to outport there is no dependency by other ports.
Itz quit opposite for OFF path.

If im not corect plz coment on it.
 

1. STA mode( functional mode, io mode , max/min/typical, cross-talk ..... )
2. setup , hold time ( negative setup,hold time)
3. fix method
4. tool command (PT....)
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top