Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Cadstar Starpoint help required

Status
Not open for further replies.

puneethcp

Newbie level 6
Joined
Oct 3, 2012
Messages
12
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,360
Hi,

Please help me with the following issue.

Star points are not connecting with two various signals by copper pouring in same electric layer.
(i am having two different ground signals say agnd and cgnd and used two templets for each ground signal,
but when i copper pour only one signal is getting shorted to starpoint, but when copperpour in different layer there is no issue).

Please suggest
 

Answered in the other thread, however you can connect them both using really big tracks also.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top