Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Cadence IC5141 spectre error with neoCircuit

Status
Not open for further replies.

okguy

Full Member level 6
Joined
Mar 1, 2002
Messages
360
Helped
15
Reputation
30
Reaction score
9
Trophy points
1,298
Location
China
Activity points
2,653
cadence ic5141 spectre

When I try to get the output within Neocircuit, I always got the following error :
... even if I use the two-stage-opamp of the demo.
I have no more idea how to serach the error :cry:

Thanks for your help !!!
OkGuy
____________________________________________________________________

error: Spectre error during run

While evaluating temp on host ******* (Mon Sep 19 07:53:07 CST 2005)
[Linux ******** 2.6.9-5.EL #1 Wed Jan 5 19:22:18 EST 2005 i686 i686 i386 GNU/Linux]
Simulator output:
cpp: unrecognized option `-$'
spectre (ver. 5.10.41.052404 -- 24 May 2004).
Includes RSA BSAFE(R) Cryptographic or Security Protocol Software from RSA
Security, Inc.

Simulating `netlist.final' on ******** at 7:53:01 AM, Mon Sep 19,
2005.

Error found by spectre during circuit read-in.
"netlist.final" 5: Syntax error in specification of `spectre//'.
"netlist.final" 7: There can be at most one global statement and, if
present, it must be the first command in the file (after title or
language directive).

spectre terminated prematurely due to fatal error.
...(See 'Eval Errors' panel for full text of error message.)
 

cadence neocircuit

I have same problem. please help me.
 

Re: cadence ic5141 spectre

When I try to get the output within Neocircuit, I always got the following error :
... even if I use the two-stage-opamp of the demo.
I have no more idea how to serach the error :cry:

Thanks for your help !!!
OkGuy
____________________________________________________________________

error: Spectre error during run

While evaluating temp on host ******* (Mon Sep 19 07:53:07 CST 2005)
[Linux ******** 2.6.9-5.EL #1 Wed Jan 5 19:22:18 EST 2005 i686 i686 i386 GNU/Linux]
Simulator output:
cpp: unrecognized option `-$'
spectre (ver. 5.10.41.052404 -- 24 May 2004).
Includes RSA BSAFE(R) Cryptographic or Security Protocol Software from RSA
Security, Inc.

Simulating `netlist.final' on ******** at 7:53:01 AM, Mon Sep 19,
2005.

Error found by spectre during circuit read-in.
"netlist.final" 5: Syntax error in specification of `spectre//'.
"netlist.final" 7: There can be at most one global statement and, if
present, it must be the first command in the file (after title or
language directive).

spectre terminated prematurely due to fatal error.
...(See 'Eval Errors' panel for full text of error message.)


The error is because the c++ compiler is not installed at the initial installation or c++ version is old.

Anyway, the developmnet package including the compiler can be installed by using "Install Package".
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top