1. I can not install IC5141 USR4 in RHEL 5. Clicking setup.sh, the screen just springed a window and then disappeared.
2. USR4 can be installed in RHEL 4.4. But the match window can not appear in simulation although I had press the radio button for match option in the artist
simulation window. When simulating, the message, " Kill prior match process...."
appears in the CIW. How to solve this issue?
1. I can not install IC5141 USR4 in RHEL 5. Clicking setup.sh, the screen just springed a window and then disappeared.
2. USR4 can be installed in RHEL 4.4. But the match window can not appear in simulation although I had press the radio button for match option in the artist
simulation window. When simulating, the message, " Kill prior match process...."
appears in the CIW. How to solve this issue?
This is due to the problem of using different threads mechanism on RHEL 5 and IC5141. Generally speaking, the thread mechanism which RHEL 5 uses is NPTL, but the IC5141 uses the old one : Linuxthreads. Any linux version based on glibc 2.4 or higher doesn't support linuxthreads any more, that is why you can't install IC5141 on RHEL 5 or FC5 6.
BTW, IC610 uses NPTL, it can be installed on RHEL 5.
This is due to the problem of using different threads mechanism on RHEL 5 and IC5141. Generally speaking, the thread mechanism which RHEL 5 uses is NPTL, but the IC5141 uses the old one : Linuxthreads. Any linux version based on glibc 2.4 or higher doesn't support linuxthreads any more, that is why you can't install IC5141 on RHEL 5 or FC5 6.
BTW, IC610 uses NPTL, it can be installed on RHEL 5.
I have treied all systems. I can't install 5141 on RHEL5. You can use Linux AS4(change nothing) or SUSE 10.1(replace Tar an Sort by AS4 or Redhat 9.0). Then enjoy it!
I already met your problem. You can solve your problem by reinstall your Redhat Linux 5 and you name your computer name: localhost.localdomain
Don't put your static IP address and default gateway in your LAN card.
Best regards.
This is due to the problem of using different threads mechanism on RHEL 5 and IC5141. Generally speaking, the thread mechanism which RHEL 5 uses is NPTL, but the IC5141 uses the old one : Linuxthreads. Any linux version based on glibc 2.4 or higher doesn't support linuxthreads any more, that is why you can't install IC5141 on RHEL 5 or FC5 6.
BTW, IC610 uses NPTL, it can be installed on RHEL 5.
Dear Onyx,
can i use the softload installer of IC6.1 to install from IC5141 USR4 CD media? i do not want to install from tarball.
can you please tell me a method to install IC5141 on RHEL5?
i have to use RHEL5 as my PC is Core2DUO with intel 965 Motherboard. old RHEL do not recognize it.
1. I can not install IC5141 USR4 in RHEL 5. Clicking setup.sh, the screen just springed a window and then disappeared.
2. USR4 can be installed in RHEL 4.4. But the match window can not appear in simulation although I had press the radio button for match option in the artist
simulation window. When simulating, the message, " Kill prior match process...."
appears in the CIW. How to solve this issue?
Hi
First you need to set your .bashrc to assume the kernel to early version like 2.4.1
by adding LD_ASSUME_KERNEL 2.4.1.
also u need to install a older version of the tarball like 1.3 or earlier.
hspice200409 is ok. (Use hspiceS in CDS mixed-signal
environment)
So I think the issue is the compatible problem of
Hspice200603.
When the installation of Hspice200603 was ended,
A message appeared:
HSPICE installing succeed.
It is safe to ignore the following Installer error message:
ERROR: Failed to execute <installdir>/bin/config