sherry20
Junior Member level 3
cadence analog environment spectre
I finshed the schematics and the test bench, both are saved and have no error. when i go to AE -> simulation -> run, i got the an error in the icfb window:
It checked the netlist files and started simulator, and there's this error
"errors encountered during simulation. the simulator run log has not been generated. Possible
cause could be an invalid command line option for the version of the simulator you are
running. choose setup ->environment and verify that the command line option specified in
the userCmdLineOption field are supported for the simulator.
Alternatively run the simulator standalone using the runSimulation file in the netlist
directory to know the exact cause of the error."
when i go to setup ->environment->userCmdLineOption, it's blank there. I'm not sure if
there should be something there.
If it's not clear where the problem is, could you let me know how to run the
"runsimulation" file alone? I saw that file in a folder, and i could double click it to
run it in terminal, but it doesn't display anything, and i think at least i should run it
through some Cadence command...
Thanks a lot,
Sherry
I finshed the schematics and the test bench, both are saved and have no error. when i go to AE -> simulation -> run, i got the an error in the icfb window:
It checked the netlist files and started simulator, and there's this error
"errors encountered during simulation. the simulator run log has not been generated. Possible
cause could be an invalid command line option for the version of the simulator you are
running. choose setup ->environment and verify that the command line option specified in
the userCmdLineOption field are supported for the simulator.
Alternatively run the simulator standalone using the runSimulation file in the netlist
directory to know the exact cause of the error."
when i go to setup ->environment->userCmdLineOption, it's blank there. I'm not sure if
there should be something there.
If it's not clear where the problem is, could you let me know how to run the
"runsimulation" file alone? I saw that file in a folder, and i could double click it to
run it in terminal, but it doesn't display anything, and i think at least i should run it
through some Cadence command...
Thanks a lot,
Sherry