Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Cadence allegro color defintion

Status
Not open for further replies.

ouille

Junior Member level 3
Joined
Sep 11, 2002
Messages
29
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
131
allegro color script

Hello

trying tu use cadence allegro, i allays start with pink color for all components.

Can i save the color assignement, find a confiuration file with a such color assignement ?

Are there skilled users of cadence allegro here ?
 

allegro color

A side track. Does allegro allows overlaped layers to change color.
e.g. red (layer 1) + blue (layer2) give purple?
 

pcb allegro set color script

ouille said:
Hello

trying tu use cadence allegro, i allays start with pink color for all components.

Can i save the color assignement, find a confiuration file with a such color assignement ?

Are there skilled users of cadence allegro here ?
***********************************************
or you can make your own coloring scheme by seting up script
file and loading at any time in to design. so you get the same colors all the time :) !!
 

cadence layer colors

ok

what kind of script ? can you be more explicit, can you post an example script (it's not illegal material)

I find script heavy just for defining color, is it the best way ?

thank's
 

cadence allegro scripting

mwpro said:
A side track. Does allegro allows overlaped layers to change color.
e.g. red (layer 1) + blue (layer2) give purple?

i think it's not possbile, but overlay of layer may help

i'll use specttra really early to solve lot's of allegra problem or misuses
 

allegro colors cadence

ouille said:
ok

what kind of script ? can you be more explicit, can you post an example script (it's not illegal material)

I find script heavy just for defining color, is it the best way ?

thank's
********************************
this is my 5 grid colors
 

cadence layer color

you are limited to the predefined colors.

But you can adjust all colors you want in the "Color and visbility" form.
Then just do an "write local" to put your definition into a file.
"read local" will give you all predefined colors back on every board file you want.

Tobs.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top