bullmer cutter system 2004 initialisation

[mihai_tz]

bullmer cutter

hello,
can anyone help me with a bullmer cutter system 2004
when i start initialisation c axe run,
c-ref switch is reached, c axe stops and y axe runs
y-ref switch is reached, y axe runs slowly, reach y-min switch and stops
machine is locking and got an error 'PATH DEVIATION - Y AXE'
somebody changed the cams of the y axe limit switch
i dont know how they where
i put the y-ref switch to change its state from 0 to 1 and from 1 to 0,
but the error appear in anyway

thanks!

 

[evp24]

bulmer cutter

Salut Mihai,

Incearca sa suni in Germania la Assyst:

Phone: +49 (0)89 90505-0
Fax: +49 (0)89 90505-102
eMail: info@assyst-intl.com
www: www.assyst-intl.com

sau sa vb cu dl Guenter:
<guenter.ebser(at)assyst-intl.com>
dansul facea service-ul la assyst-bullmer pe Romania.

Sau suna la **broken link removed** vb dl. Mihai elecronistul.
tel./fax: 021 2323844; 021 2323872; 021 2329893

**broken link removed**

**broken link removed**

Sper sa-ti fie de folos.

 

[nandhu015]

forum elecronisti

Salut Mihai,

Incearca sa suni in Germania la Assyst:

Phone: +49 (0)89 90505-0
Fax: +49 (0)89 90505-102
eMail: info(at)assyst-intl.com
www: www.assyst-intl.com

sau sa vb cu dl Guenter:
<guenter.ebser(at)assyst-intl.com>
dansul facea service-ul la assyst-bullmer pe Romania.

Sau suna la **broken link removed** vb dl. Mihai elecronistul.
tel./fax: 021 2323844; 021 2323872; 021 2329893

**broken link removed**

**broken link removed**

Sper sa-ti fie de folos.

In English please

Nandhu