Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

bugs in cadence IC5141

Status
Not open for further replies.

haoshs

Member level 3
Joined
Jul 24, 2004
Messages
56
Helped
1
Reputation
2
Reaction score
1
Trophy points
1,288
Activity points
285
I found two bugs in the cadence IC5141 ADE.
(1) When a schematic contains a instance of vsin , the exported netlist for vsin is as following:

V1 (1 0) vsource dc=1 mag=1 phase=0 sinedc=1 ampl=1 freq=1K

and the bug is that there is not the type declatation "type=sine" in the netlist for sine voltage source, the same as isin vpulse ipulse etc.
I've check the the netlist for vin and vpulse in the IC4.4.6, and The netlist for sine contains the "type=sine". that's the difference in the two versions for the same schematics.

(2) When "pPar()" parameter appears in the netlist, Spectre would found error with following massages:

Function 'pPar' is undefined or is used recursively.

Is anyone encounter the same problems with me?
And can anyone help me?

Thank you!
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top