Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

BPF / noise attenuator for TA7642 - improved design

Status
Not open for further replies.

andreidaniel

Member level 2
Member level 2
Joined
Sep 18, 2010
Messages
42
Helped
1
Reputation
5
Reaction score
2
Trophy points
1,288
Location
Romania, Iasi City
Visit site
Activity points
1,818
Hi all! Recently I have found some new diagrams for the well known TA7642/LMF501. Here are presented some diagrams for band pass filter and at last an improved FET buffter with 2 tuned circuits.

**broken link removed**
**broken link removed**
**broken link removed**
**broken link removed**
**broken link removed**
**broken link removed**
**broken link removed**
**broken link removed**
**broken link removed**

source: https://www.rf-world.jp/dls/fujihira/pdf/Fujihira-radio-s08.pdf

- - - Updated - - -

*Please note that for the diagram from page 7 there is used a loopstick antena + 2 x red coils (MW oscillators) in series! The capacitor between those 2 tuned circuits is not necessary to use because of the internal capacity of the VC.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top