Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Board: AT89STK05 Chip: AT89C5131

Status
Not open for further replies.
A

ahcun

Newbie level 3
Joined
Dec 31, 2007
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,302
Hi All,
I Am Totally New Here..
Need Some Help..

I Am Using Board AT89STK05 WITH Chip AT89C5131 to connect to a LCD using header port J6 Right Header(From Board to LCD)

Can I Use Board P0.0 - P0.7 for LCD DB0 - DB7 ?
Can I Use P2.0, P2.1, P2.2 for LCD RS, RW, E ?
Do I Connect LCD VDD to Board's VCC?

I Need Some Example C Programs To Display Some Words Onto The LCD To Make Sure My Stuff Actually Works..

Hope Someone Can Help Me
Thanks...
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top