Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Bluetooth Module(aubtm 20) and Max 232-Hyperterminal

Status
Not open for further replies.
R

robotsmani

Newbie level 6
Joined
May 26, 2009
Messages
14
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,365
Hi All,
I am using bluetooth module AUBTM-20 and interfaced with a max232 to connect to pc. somthing like this **broken link removed**
While using hyperterminal and power on i am getting OK. But when i pass some commands like LLL there is no response.
How do i check the aubtm20 what are the commands(i checked the AT command list for aubtm20, but it is not working)

Here is the hyperterminal setting bit per second-9600, data bits-8, parity-None, stop bits-1, flow control- none.

Please help me...(i already searched in this forum, but no solutions)

I want integrate this bluetooh for a robot to control from android phone.

Thanks
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top