Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Bluetooth Data Acquisition Project HELP!

Status
Not open for further replies.
E

elan_arr

Newbie level 4
Joined
Aug 16, 2009
Messages
7
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,329
Hi,
I have this situation. I have to design a bluetooth based data acquisition system. This device should detect other bluetooth devices in its range and store the MAC ID of the detected devices and the time of detection. It'll be helpful if someone gives me an idea how to work about with this project. Where to start and stuff..
 

First you have to start with basics bluetooth interfacing.
get two modules
1> usb based pc bluetooth
2> UART based ready to interface bluetooth for uC.
then learn communication between these two.
 

yeah that is fine...but in my project the objective is to acquire and store the MAC id's in a memory device say a micro SD or something...and later say after two hours or so, visit the place take the card to retrieve id's later in the lab....
Thanks for your reply by the way...:)
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top