Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Bluetooth/ANT Stack Development for PAN132X Modules

Status
Not open for further replies.

ernpao

Full Member level 1
Full Member level 1
Joined
Sep 16, 2010
Messages
98
Helped
26
Reputation
52
Reaction score
22
Trophy points
1,298
Visit site
Activity points
2,043
Hi, just wanted to ask if anyone can help me how to begin developing the host's firmware for interfacing with PAN132X modules (based on TI's CC2567 chips - which are unfortunately no longer supported by TI).

https://www.mouser.ph/new/panasonic/pan1317-pan1327/

I'm working with a PAN1327 module and have to interface it with a PIC32 (PIC32MX795F512L). I'm really a beginner with BT/ANT stacks and would really appreciate it if anyone can point me in the right direction.
 

The PAN132X modules/CC2567 controller from TI communicates with a host controller via HCI interface. I've seen other bluetooth modules use HCI as well and was wondering if anyone has experience developing firmware for similar devices. Thanks.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top