moataz fouad
Member level 1
Hello,
Just designed and manufactered my BlueNRG-based PCB on ******, see attached picture for a 2-layer PCB with a PCB antenna works at 2.4GHz.
PCB specs:
Length : 55 mm Width : 30 mm Quantity : 10
Layers : 2 layers Thickness : 1.6 mm Surface Finish : HASL with lead
Finished Copper : 1 oz Cu Solder Mask : Green Silkscreen : White
CreateTime : 7/18/2016 5:25:53 AM Build Time : 2-3 days
Schematic used components:
MCU: PIC18F25K20T-I/SS
Bluetooth chip: BLUENRGQTR
See attached PCB photo.
Just designed and manufactered my BlueNRG-based PCB on ******, see attached picture for a 2-layer PCB with a PCB antenna works at 2.4GHz.
PCB specs:
Length : 55 mm Width : 30 mm Quantity : 10
Layers : 2 layers Thickness : 1.6 mm Surface Finish : HASL with lead
Finished Copper : 1 oz Cu Solder Mask : Green Silkscreen : White
CreateTime : 7/18/2016 5:25:53 AM Build Time : 2-3 days
Schematic used components:
MCU: PIC18F25K20T-I/SS
Bluetooth chip: BLUENRGQTR
See attached PCB photo.
Last edited by a moderator: