Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

biasing network for RF system

Status
Not open for further replies.
J

jignesh_prajapati

Junior Member level 3
Joined
Nov 22, 2014
Messages
29
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
168
hi
i have designed RF mixer, for Biasing purpose i have used simple voltage devider arrangement using two PMOS is it Ok? or some biasing network need to be design? image is attached here with, in some literature i have seen Resistance is connected between biasing terminal & gate of MOSFET what is the purpose of that? fig1_proposed.jpg
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top