Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

BeagleBone Black, connection problem

Status
Not open for further replies.

Electronican

Newbie level 4
Joined
Jun 14, 2016
Messages
6
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Activity points
46
Hello everybody,

I received the BBB from my friend and i have a problem.

I was trying to connect with bbb by usb cable but this is not working.

When I connecting the bbb without the SD card the LED_Power is working on and i heard the Windows sound of connected device, but other leds are dead.
When I connecting the bbb with the SD card with this os installed - " Debian 7.5 (BeagleBone Black - 2GB eMMC) 2014-05-14 " for eMMC flasher, the BBB is dead and the LED_Power blink for 1 second and after that is turned off. I'm pushing the boot button before connecting to the power but this still not working.

I don't know what to do more with that problem.
 

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Top