Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Basic Stamp interface with serial to usb converter

Status
Not open for further replies.
T

TagMyTech

Newbie level 3
Joined
Nov 5, 2008
Messages
3
Helped
0
Reputation
0
Reaction score
0
Trophy points
1,281
Activity points
1,305
usb basic stamp problem

Hello There,
i recently just learn basic stamp to program parallax boe-bot,well it works fine when i connected the RS232 male to the board and RS232 to Dekstop CPU but when i use my laptop instead of dekstop ,i used RS232 TO USB adapter to connect it..power all is on but i cant program it into the basic stamp although the driver is found but it appeared "No Basic Stamps found"...can help me out please?
 

Status
Not open for further replies.

Similar threads

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top