Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Bad Initial Net Bindings (nets don't match) Shorted Instance Connections

Status
Not open for further replies.

xbotao180

Newbie level 3
Newbie level 3
Joined
May 20, 2014
Messages
4
Helped
0
Reputation
0
Reaction score
0
Trophy points
1
Visit site
Activity points
36
In LVS, Assura can't find the following device in schematic. However, The H35 Library did't provide the schematic for this device. Do you know how to solve these problems?
The LVS error are "Bad Initial Net Bindings (nets don't match) " "Shorted Instance Connections". Are these errors caused by these unknown device?
Best Regards

(_, CORNERP layout Botao) Cell 0 4*
(_, ENDCAPL layout Botao) Cell 0 1*
(_, ENDCAPR layout Botao) Cell 0 1*
(_, FILLRT10 layout Botao) Cell 0 289*
(_, FILLRT25 layout Botao) Cell 0 160*
(_, FILLRT5 layout Botao) Cell 0 546*
(_, PERI_SPACER_50_P layout Botao) Cell 0 36*
(_, ProcessorM0_PAD_VIA0 layout B...) Cell 0 8*
(_, ProcessorM0_PAD_VIA1 layout B...) Cell 0 204*
(_, ProcessorM0_PAD_VIA2 layout B...) Cell 0 4*
(_, ProcessorM0_PAD_VIA3 layout B...) Cell 0 102*
(_, ProcessorM0_PAD_VIA4 layout B...) Cell 0 12*
(_, ProcessorM0_PAD_VIA5 layout B...) Cell 0 4*
(_, ProcessorM0_PAD_VIA6 layout B...) Cell 0 2*
(_, spacer_50 layout Botao) Cell 0 2*
(NMOS4) MOS 0 5792*
 

Attachments

  • LVS_Report.txt
    1.3 MB · Views: 86
Last edited by a moderator:

Status
Not open for further replies.

Part and Inventory Search

Welcome to EDABoard.com

Sponsor

Back
Top